Please wait, reading data ...

All data saved!

You can continue working.

Invalid user oder password!

Do you really want to logout?

Vitogate 300

Authentication required

Vitogate 300 needs user name and password to login.

User name:
Password:

Please pre-select a file!

Please insert USB stick and press OK.

Backup in progress. Please don't remove the USB stick during backup!

Backup to USB stick is ready now. You can remove the USB stick.

USB stick not found! Please check USB stick and try again.

Cannot write to USB stick! Check USB stick an try again.

Please enter a backup name previously.

Restore transfer in progress. Please wait...

Reading USB stick. Please wait...

Found the following backups on the USB stick:

Please select on of the backup archives from the top and press OK.

Backup information
Created at:
Name:
Location:
IP address:
Filename:

ATTENTION: If you restore the backup archive,
the current configuration will be lost.

Do you really wan't to restore the archive?

Installing the backup archive. Please wait...

The Vitogate restore was successful. You have to restart the Vitogate to activate the configuration.

Do you want to restart the Vitogate now?

Cannot install the backup archive!

No Vitogate backup found on the USB stick!

Please pre-select a file!

File will be transferred. Please wait...

The update file was successful transferred to the Vitogate.

You have to restart the Vitogate to install the update.

Do you want to restart the Vitogate now?

Error on transfering the update file to the Vitogate!

A complete restart takes more than 1 Minute. Do you really want to restart the Vitogate?

Do you really want a communication restart?

Vitogate is restarting now.
Please wait ...

Vitogate communication is restarting now.
Please wait ...

Vitogate has been restarted now.

Vitogate communication has been restarted now.

Please pre-select a file!

CSV file transfer in progress. Please wait...

Searching participant

??

Please wait ...

Do you really want to delete the participant?

Do you really want to delete the BACnet object?

Please enter the new value:

PropertyValue
Object-Identifier:
Object-Name:
Description:
Unit:
Min-Pres-Value:
Max-Pres-Value:
Resolution:
Time-Delay:
Time-Delay-Normal:
Event-Detection-Enable:
Event-Algorithm-Inhibit:
Reliability-Evaluation-Inhibit:
Notification-Class:
Low-Limit:
High-Limit:
Deadband:
Event-EnableEvent-Message-Texts-Config
Offnormal:
Fault:
Normal:
Notify-Type: Alarm   Event
PropertyValue
Object-Identifier:
Object-Name:
Description:
Polarity:
Inactive-Text:
Active-Text:
Change-Of-State-Counter:
Elapsed-Active-Timer:
Time-Delay:
Time-Delay-Normal:
Event-Detection-Enable:
Event-Algorithm-Inhibit:
Reliability-Evaluation-Inhibit:
Notification-Class:
Alarm-Value: Inactive   Active
Event-EnableEvent-Message-Texts-Config
Offnormal:
Fault:
Normal:
Notify-Type: Alarm   Event
PropertyValue
Object-Identifier:
Object-Name:
Description:
States
StateState-TextNormalOffnormalFault
Time-Delay:
Time-Delay-Normal:
Event-Detection-Enable:
Event-Algorithm-Inhibit:
Reliability-Evaluation-Inhibit:
Notification-Class:
Event-EnableEvent-Message-Texts-Config
Offnormal:
Fault:
Normal:
Notify-Type: Alarm   Event
PropertyValue
Object-Identifier:
Object-Name:
Description:
Log_Device_Object_Property: 
Logging-Type:
Log-Interval:
Buffer-Size:
Start-Time:
Stop-Time:
Enable:
Stop-When-Full:
Align-Intervals:
Interval-Offset: seconds
Event-Detection-Enable:
Event-Algorithm-Inhibit:
Reliability-Evaluation-Inhibit:
Notification-Class:
Notification-Threshold:
Event-EnableEvent-Message-Texts-Config
Offnormal:
Fault:
Normal:
Notify-Type: Alarm   Event
PropertyValue
Object-Identifier:
Object-Name:
Description:
PropertyValue
Object-Identifier:
Object-Name:
Description:
Priority
Offnormal:
Fault:
Normal:
Ack-Required
ParameterValue
IP address:
Port:
Distribution mask:
Vitogate overview Last Refresh:  
Device configuration
Vitogate type:
Name:
Location:
Description:
System status
Status LED:
Datapoints:
CPU load:
System memory:
VI LON status
Driver state:
BACnet status
Driver state:
Modbus status
Driver state:
Vitogate settings Last Refresh:  
ParameterValue
Name:
Location:
Description:
Vitogate type:
Language of datapoints:
Units:
IP network settings Last Refresh:  
ParameterValue
Network adapter
MAC address:
IP address:
Netmask:
Default gateway:
Network name info
Hostname:
Nameserver 1:
Nameserver 2:
Services
Webserver access:
System time settings Last Refresh:  
ModeSettings
   

   
Date:
Time:  h :  m :  s        

   
NTP Server:

   
Timezone:
Time format:
Date format:
Perform Backup/Restore Last Refresh:  
Mode

 

 
Change password Last Refresh:  
ParameterValue
User name:
Current password:
New password:
Retype password:
Update Vitogate software Last Refresh:  
ParameterValue
Vitogate version:
Supported languages:
German
NA-English
UK-English
CA-French
Here you can upload a file to the gateway, that contains a software update.
Please do only use a file from the manufacurer of the gateway. The name of the
file must be update.ugw. By transferring the updatefile the update isn't already
performed.
In the first step the update will be stored onto the gateway. It will be activated
when you start the gateway the next time.
Important note:
The configuration will not be changed during the update if the standard
data point list is used. If client-specific data point lists are used
before the update, then these will be deleted during the update and
replaced with the appropriate, up-to-date standard data point lists. If
your current Vitogate configuration contains client-specific data point
lists that are mandatory for your gateway application, please contact
Viessmann Technical Service.
Restart Vitogate Last Refresh:  
Options

By pressing the button 'Restart' you force the Vitogate to do a communication reset.
This is necessary on most configuration changes.
 

     

     
 

By selecting 'complete system restart' you force the vitogate to do a complete hardware
restart like power down/up. You have to do the login again.
After starting the reset the gateway will not transfer data for some minutes until the hard- and
software is up again.
The configuration will be retained.
 
VI LON configuration Last Refresh:  
ParameterValue
Domain-ID (fixed):
Subnet-ID (system number):
Node-ID (participant number):
Polling rate:
Scan mode:
Scan participants Last Refresh:  
Scan settings

System number:
Participant number from:to:

 
Participant list

Use

Status
System.
Participant
Hardware
-ID

Model
SW-
Index

Last scan

 
Participant  Last Refresh:  
VS-AddrBACnetModbusNameUnit
BACnet configuration Last Refresh:  
Startup delay: sec.
Password DCC/RD:
Datalinks:
BACnet device object Last Refresh:  
PropertyValue
Device instance:
Device name:
Description:
Location:
Vendor-Identifier:
Vendor-Name:
Model-Name:
Firmware-Revision:
Application-Software-Version:
APDU Max-Length-Accepted:
APDU Timeout: millisec.
APDU Retries:
APDU Segmentation-Supported:
APDU Max-Segments-Accepted:
APDU Segment-Timeout: millisec.
BACnet objects Last Refresh:  
Object-IdObject-NameDescription  Trend
BACnet EDE file Last Refresh:  

The configured BACnet objects and functions of the gateway can be exchanged with partner companies by a special Excel table file.

This EDE file (EDE = Engineering Data Exchange) will be generated automatically.

Press here  to start generating and download the compressed archive file to your PC.

Modbus configuration Last Refresh:  
ParameterValue
Slave-Address:
ModeSettings
   
ParameterValue
Port:

   
ParameterValue
Protocol:
Baudrate:
Databits:
Parity:
Stopbits:
Modbus objects Last Refresh:  
RegisterNameUnitFormat
Info about Last Refresh:  

Vitogate 300 BN/MB

ParameterValue
Vitogate version:
Supported languages:
German
NA-English
UK-English
CA-French
Supported devices:
HW-IDModelGermanEnglish


Viessmann Group

Viessmann is one of the world's leading manufacturers of intelligent, convenient and efficient
systems for heating, air conditioning/ventilation, cooling and decentralised power generation.
Vitogate info Last Refresh:  
ParameterValue
Vitogate type:
Datapoints:
System start:
System memory:
Operating system:
Version:
Last update: 
System status Last Refresh:  
Logfiles Last Refresh:  
RoutingTypeNameVerbose
Ping Last Refresh:  
Please type in the ip address to check.
ping -c3
Traceroute Last Refresh:  
Please type in the ip address to check.
traceroute
Process information Last Refresh:  
Supported devices Last Refresh:  
Add new CSV file

 
ZEIDModelGermanEnglish